書誌事項
- タイトル別名
-
- Fluorine Laser Induced Surface Modification and Its Advanced Application
- フッソ レーザ ニ ヨル ヒョウメン カイシツ ト ソノ サイセンタン オウヨウ
この論文をさがす
抄録
A transparent, hard silica glass (SiO2) layer was formed on a conventional protective coat made of silicone ([SiO(CH3)2]n) on a polycarbonate plate by the 157nm F2 laser-induced photochemical modification of silicone into SiO2. An optimum laser irradiation time of the F2 laser was found to form a crack-free SiO2 layer. The high optical transparency of the samples in the visible light region remained unchanged after the F2 laser irradiation. In the Taber abrasion test, the SiO2 layer markedly reduced the number of scratches, resulting in a low haze value. The haze values of the samples also depend on the thickness of the silicone protective coat underneath the SiO2 protective layer. As a result, the difference of haze value was successfully reduced to 1.2%, compared with these of the nonirradiated sample and a bare polycarbonate plate of approximately 3.5 and 46%, respectively, which is comparable to the case of a bare silica glass of approximately 0.9%. In addition, the thickness of the SiO2 protective layer was estimated to be approximately 0.44μm for the 30-s laser irradiation by immersing the samples in 1 wt % hydrogen fluoride aqueous solution and measuring the depth using a surface profilometer.
収録刊行物
-
- 電気学会論文誌C(電子・情報・システム部門誌)
-
電気学会論文誌C(電子・情報・システム部門誌) 133 (3), 490-493, 2013
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204607950976
-
- NII論文ID
- 10031155337
-
- NII書誌ID
- AN10065950
-
- ISSN
- 13488155
- 03854221
-
- NDL書誌ID
- 024348748
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可