凍結中子の表面乾燥を抑制する中空造型技術の開発

DOI Web Site 参考文献7件

書誌事項

タイトル別名
  • Hollowing Fabrication Technique for Frozen Core Mold to Improve Its Surface Condition
  • トウケツ ナカゴ ノ ヒョウメン カンソウ オ ヨクセイ スル チュウクウ ゾウケイ ギジュツ ノ カイハツ

この論文をさがす

抄録

<p>  Frozen mold casting provides industrial advantages such as improvement of working conditions and reduction of factory waste. However, to put it to practical application, it is important to establish economical and productive freezing technique for casting sand molds. The differential pressure freezing method which enables sand molds to be frozen in the short time at lower costs is drawing attention as a useful way to produce frozen molds, but there still remain some problems with regard to mold surface conditions. In this study, the authors reviewed a new differential pressure freezing method which is suitable for the core molds, whose entire surface is usually covered by molten metal in the casting. A hollow core was prepared and pressure difference was given between the hollow portion and outer space to cause aeration in the radius direction. It was confirmed that frozen core molds produced by this process had uniform lateral surfaces with good conditions. Moreover, the hollow frozen core molds did not break during casting work, and successfully provided the desired cavity in castings. We also developed an air-through mold form material to facilitate the above freezing method. This air-through material has eased most of the regulations on core geometry in the freezing method, enabling production of frozen mold with irregular and/or curved surfaces easily.</p>

収録刊行物

  • 鋳造工学

    鋳造工学 85 (2), 107-112, 2013

    公益社団法人 日本鋳造工学会

参考文献 (7)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ