研削砥石の目立て間寿命判定基準

DOI Web Site 被引用文献3件

書誌事項

タイトル別名
  • Criterion of Between-Dressing Tool Life of Grinding Wheel
  • ケンサク トイシ ノ メタテ カン ジュミョウ ハンテイ キジュン

この論文をさがす

抄録

Sharp edges of abrasive grains on a grinding wheel produced by dressing action go bad quickly or slowly during grinding, following the nature of wear of the wheel. One must then, dress the wheel surface again to continue the right operation. The interval between two dressings is called the between-dressing tool life of a grinding wheel. In this paper, a criterion of the life is proposed. It was experimentally revealed that the performance of a grinding wheel is mainly dependent on the fractional area of flank wear of abrasive grains to the area of wheel surface. The increase of the area of flank wear produces many ineffective grains which bring about the sudden increase of grinding force, the deterioration of finish and the burning of work surfaces. This fact suggests that the fractional area of the flank wear of abrasive grains can be used for the criterion of the between-dressing life of a grinding wheel.

収録刊行物

  • 精密機械

    精密機械 28 (328), 286-291, 1962

    公益社団法人 精密工学会

被引用文献 (3)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ