直流サーボモータによるカム曲線の出力 (第3報)

DOI 機関リポジトリ HANDLE Web Site 被引用文献3件

書誌事項

タイトル別名
  • Output of Cam Motion Curve by DC Servo Motor (3rd Report)
  • 直流サーボモータによるカム曲線の出力-3-ポリダイン曲線による位置決め
  • チョクリュウ サーボモータ ニ ヨル カム キョクセン ノ シュツリョク 3
  • Positioning by Polydyne Motion Curve
  • ポリダイン曲線による位置決め

この論文をさがす

抄録

Several kinds of cam motion curves have been utilized to the high speed positioning or the contour tracing. To realize the same performance by servo motors, the bangbang or the optimum control and others are applied recently. This paper describes the feedforward methods to obtain the same high speed positioning as the mechanical cam motion by applying the inverse transfer function compensation for DC motor driving system with one degree of freedom vibration load, giving the Polydyne motion curve inputs. By this method to give the dwell-risedwell polynomial motion curve with continuous velocity, accelaration and the other higher order differential at start and final points, the output loads are able to be obtained the positioning at arbitrary setting conditions without the feedback from the load. By the adequate selection of Polydyne curves on the basis of the residual vibrating characteristics, the positioning stable for parameter variations are clarified to be obtained.

収録刊行物

  • 精密工学会誌

    精密工学会誌 59 (1), 107-112, 1993

    公益社団法人 精密工学会

被引用文献 (3)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ