書誌事項
- タイトル別名
-
- Creation of Multiple-focus Micro Fresnel Lens Using Non-Rotational Cutting Tools.
- ヒカイテン コウグ ニ ヨル タショウテン マイクロ フレネル レンズ カコウ
この論文をさがす
抄録
The study deals with the manufacture of multiple-focus micro Fresnel lenses by means of non-rotational diamond cutting tools mounted on an 5-axis control ultraprecision machining center with the positioning accuracy of 1 nm and the rotational one of 0.00001 degree. Micro Fresnel lens consisting of a number of concentric circular microgrooves are in general produced by a lathe. On the other hand, multiple-focus micro Fresnel lens consisting of several micro Fresnel lenses is not notationally symmetric, thus requiring the introduction of 5-axis control ultraprecision machining center. Two-focus and three-focus micro Fresnel lenses are designed and manufactured by controlling the movement of non-rotational diamond cutting edge along the designed micro grooves at the cutting speed of 40mm/min with kerosene dripped as cutting fluid. As a result, the non-rotational diamond cutting method allows multiple-focus micro Fresnel lenses to be manufactured accurately and neatly without any burr generation.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 67 (9), 1463-1467, 2001
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679772712192
-
- NII論文ID
- 110001373239
- 10007780774
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 5901075
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可