書誌事項
- タイトル別名
-
- Effect of the Charge of "Komori" Iron Sand on the Properties of"Tamahagane" Steel Produced by "Tatara" Operation
- タタラ セイサンブツ タマハガネ ノ セイシツ ニ オヨボス コモリ サテツ シヨウ ノ エイキョウ
この論文をさがす
抄録
The Tatara furnace, so called Nittoho Tatara, was reconstructed in 1977 based on "Yasukuni Tatara" which had been workedbefore the end ofthe World War II. Mr. Yoshizo Abe as a leader "Murage" developed the new techniques of direct steelmaking, "Kera-oshi" for Tatara operation only using "Masa" iron sand for the 3 stages of "Komori", "Nobori" and "Kudari". Until the age of "Yasukuni Tatara", the operation hadbeen carried out in 4 stages with "Komoritsugi" following "Komori", and in the first two stages, the "Komori" and "Komoritsugi" iron sandswith higher (Fe2O3)/(FeO) ratio had been used, respectively. In the presentwork, 7 Tatara operations with 3stages were carried out using"Komori" iron sand or "Masa" iron sand for the "Komori" stage followed by the last two stages using "Masa" iron sand.The operation using"Komori" iron sand produced more amountand higher carbon content of "Tamahagane" than that only using "Masa" iron sand, because "Komori" iron sand was reduced easier than"Masa" iron sand.
収録刊行物
-
- 鉄と鋼
-
鉄と鋼 85 (12), 911-916, 1999
一般社団法人 日本鉄鋼協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205217117696
-
- NII論文ID
- 110001457057
-
- NII書誌ID
- AN00151251
-
- ISSN
- 18832954
- 00211575
- http://id.crossref.org/issn/00211575
-
- NDL書誌ID
- 4918800
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可