溶融マグネシウム浴と炭化珪素粉末を用いた鉄鋼の珪素浸透法

書誌事項

タイトル別名
  • Siliconizing of Iron and Steel by Molten Magnesium Bath with Silicon Carbide Powder
  • ヨウユウ マグネシウムヨク ト タンカ ケイソ フンマツ オ モチイタ テッコ

この論文をさがす

抄録

A molten magnesium bath was used to siliconize iron and steel specimens embedded in SiC powder for various periods at 973-1123K. The siliconized layer obtained was composed of Fe3Si phase as the matrix and SiC phase as dispersed particles.<BR>Therefore, a hard composite layer, as high as 820 of Vickers hardness number, could be obtained.<BR>The thickness of the layer varied depending on the siliconizing temperature and time. Then the thickness was measured as to iron specimens siliconized with 5μm-SiC powder and then the diffusion coefficient was calculated as, <BR>D=34.22×10-4exp[-186.30(kJ/mol)/RT] (m2/s). The thickness of the layer could also vary with SiC powder size of 2 to 40μm, the smaller in the size, the thicker in the layer. However, SiC powder of 5μm was thought to be suitable practically.

収録刊行物

  • 鉄と鋼

    鉄と鋼 83 (7), 442-447, 1997

    一般社団法人 日本鉄鋼協会

参考文献 (9)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ