炭素飽和溶融Fe-S合金中のSn,Sbの活量

書誌事項

タイトル別名
  • Activities of Sn and Sb in Liquid Fe-S Alloy Saturated with Carbon
  • タンソ ホウワ ヨウユウ Fe S ゴウキンチュウ ノ Sn Sb ノ カツリ

この論文をさがす

抄録

The activities of tin and antimony in liquid Fe-S alloy saturated with carbon were determined at 1673 K to 1873 K by the distribution method using liquid silver. The concentration range of tin and antimony measured in the iron melt was less than 2 mass% and that of sulfur was up to FeS saturation (about 1.9 mass% at 1673 K).<BR>The activity coefficients of tin and antimony, γ(Fe-Csat.)Sn and γ(Fe-Csat.) Sb, and the solubility of carbon, [C]sat., in iron melt measured could be empirically expressed as the function of tin, antimony and sulfur contents in liquid iron saturated with carbon and temperature as follows;<BR>log γ(Fe-Csat.)Sn=485/T+0.777-28.33 XSn-4.20 XS, <BR>log γ(Fe-Csat.)Sb=-1000/T+0.314-18.34 XSb-2.17XS, <BR>[C]sat.=2.54×10-3T+0.65-0.33[mass%S]+βM [mass%M] (mass%)<BR>βSn=-0.11, βSb=-0.12<BR>(1673K1873 K, Sn≤1.5 mass%, Sb≤1.9mass%, S<1.9 mass% (FeSsat.))<BR>The activity coefficients of SnS and SbS1.5 in FeS-Na2S flux were estimated to explain the distribution behavior of tin and antimony between the flux and liquid Fe-Csat. by combining the results of the present work with the distribution ratios of tin and antimony between FeS-Na2S flux and Fe-Csat. melt determined in our previous work.<BR>Equilibrium partial pressure of SnS in Fe-C-S-Sn melt was also estimated by using the activities of tin and sulfur and free energy of formation of SnS, and the possibility of tin removal from iron melt as SnS gas was quantitatively evaluated.

収録刊行物

  • 鉄と鋼

    鉄と鋼 78 (2), 245-252, 1992

    一般社団法人 日本鉄鋼協会

被引用文献 (1)*注記

もっと見る

参考文献 (3)*注記

もっと見る

詳細情報

問題の指摘

ページトップへ