書誌事項
- タイトル別名
-
- Deformability of Stainless Steel Sheets and Effects of Lubricants on It
- ステンレス コウハン ノ カコウセイ ト ジュンカツ
この論文をさがす
抄録
A study has been made mainly of the effects of dry lubricant films on the press formability and the galling of austenitic and ferritic stainless steel sheets. The results obtained are summerized as follows:<BR>(1) The galling occurs more easily on stainless steel as compared with carbon steel, but it is possible to suppress the galling by using dry lubricant film.<BR>(2) The deformability of sheet is remarkably improved by film, therefore ferritic stainless steel sheet with the film has rather good press formability than 18-8 steel sheet with conventional high lubricating oil.<BR>(3) In round-bottomed punch stretching (punch dia. 97mm, die dia. 100mm), the effect of the film is in the same as (2) above, and the change of strain in thickness in the stretching with the film is similar to it in hydraulic bulging, but in Erichsen test it's effect is small. It must be noted that dimensions of punch and die have a large effect on the thickness changes in the stretching.
収録刊行物
-
- 鉄と鋼
-
鉄と鋼 63 (5), 824-831, 1977
一般社団法人 日本鉄鋼協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205152678400
-
- NII論文ID
- 110001844399
-
- NII書誌ID
- AN00151251
-
- ISSN
- 18832954
- 00211575
-
- NDL書誌ID
- 1822236
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可