ZrO<sub>2</sub>分散MgO-Al<sub>2</sub>O<sub>3</sub>系セラミックスの作製とその性質 (第3報)

書誌事項

タイトル別名
  • Preparation and Properties of the ZrO<sub>2</sub>-Dispersed MgO-Al<sub>2</sub>O<sub>3</sub> Ceramics (Part 3)
  • ZrO2 ブンサン MgO Al2O3ケイ セラミックス ノ サクセイ ト ソ
  • Influence of MgO-Al<sub>2</sub>O<sub>3</sub> Composition
  • MgO/Al<sub>2</sub>O<sub>3</sub>組成比の影響

この論文をさがす

抄録

ZrO2-dispersed MgO-Al2O3 ceramics with various MgO to Al2O3 compositional ratios were prepared from Mg(OH)2 powder, α-Al2O3 powder and Zr-n-butoxide by calcining at 1000°C for 2h and sintering at 1600°C for 1h. The influence of the MgO-Al2O3 compositional ratio on the sinterability and mechanical properties was studied. Addition of 10vol% ZrO2 improved the relative density of the sintered specimens containing 50 and 62.5mol% Al2O3. However, the addition was not effective at other compositional ratios. The bending strength was improved at composition containing more than 50mol% Al2O3, where the dispersed ZrO2 particles were in the form of tetragonal phase. The bending strength increased with increase in Al2O3 content in the ZrO2 dispersed specimens. The fracture toughness was improved for all specimens by ZrO2 dispersion, especially, for the specimen in which MgO-Al2O3 component was in a single crystalline phase.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (23)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ