湿式成形プロセス最適設計のための新たなスラリー評価法 (第2報)

DOI Web Site Web Site 被引用文献10件 参考文献13件

書誌事項

タイトル別名
  • New Slurry Characterization Technique for Optimizing Wet-Shaping Process (Part 2)
  • シッシキ セイケイ プロセス サイテキ セッケイ ノ タメ ノ アラタ ナ ス
  • Dependency of Centrifugal Effect on Slurry Consolidation Process
  • 遠心圧密挙動の遠心効果依存性

この論文をさがす

抄録

In order to design optimal particulate slurries to be applied in wet-shaping process, concentrated alumina slurries have been subjected to a centrifugal consolidation method, in which the mechanical properties of slurry are measured methodically by controlling the centrifugal effect. The slurry with high solid content is readily forced to form a particle network structure at the percolation threshold, the formation mechanism of which originates in a slight dehydration of slurry. The critical initial solid content for the network structure has been found to be as low as several vol%. It is demonstrated that it exists a relation between the centrifugal consolidation stress and the packing fraction, and that this relation can be interpreted to characterize the mechanical strength of the formed network structure, on which the solids content and the degree of flocculation exert a significant influence. Compared with the network structures formed from well-dispersed slurries, those from weakly-flocculated slurries have lower mechanical strength, accordingly leading to higher final equilibrium packing fraction of green bodies.

収録刊行物

被引用文献 (10)*注記

もっと見る

参考文献 (13)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ