高温強度　　常圧焼結窒化けい素の高温における引張，クリープ，疲労，クリープ疲労破壊

DOI Web Site 被引用文献4件 参考文献21件

書誌事項

タイトル別名
  • Strength of Materials at Elevated Temperatures. Fracture of Sintered Silicon Nitride in Tension, Creep, Fatigue and Creep-Fatigue at High Temperatures.
  • ジョウアツ ショウケツ チッカ ケイソ ノ コウオン ニ オケル ヒッパリ クリープ ヒロウ クリープ ヒロウ ハカイ

この論文をさがす

抄録

In order to investigate the fracture process of a sintered silicon nitride at high temperatures, tensile, static creep, and fatigue tests were carried out at temperatures from room temperature up to 1573K, and the fracture surface of each specimen was carefully observed by means of optical and scanning electron microscopes. Fracture of the silicon nitride can be classified into two types from the viewpoint of cracking morphology. One is “single cracking type” where only a single crack brings about the fracture. As the crack is initiated at the largest pre-existing defect, distribution and size of the defects greatly affect the fracture strength. The other is “multiple cracking type” where several cracks were observed on the fracture surface as well as on the specimen surface. As the cracks are initiated by viscous sliding of glassy phase along grain boundaries, pre-existing defects affect little the fracture strength. The latter type is apt to appear in the tests with lower tensile stress or lower stress rate at higher temperature.

収録刊行物

  • 材料

    材料 48 (2), 173-180, 1999

    公益社団法人 日本材料学会

被引用文献 (4)*注記

もっと見る

参考文献 (21)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ