チタン酸バリウム半導体のPTCR特性に影響を与える要因についての考察

書誌事項

タイトル別名
  • Some Factors Affecting the Magnitude of the PTCR Effect in Semiconducting Barium Titanates
  • チタンサン バリウム ハンドウタイ ノ PTCR トクセイ ニ エイキョウ オ

この論文をさがす

抄録

Large PTCR (positive temperature coefficient of resistivity) effects of more than seven orders of magnitude have been observed in porous semiconducting barium titanate ceramics with small average grain sizes in the range of 2 to 5μm and porosities between 10 and 20%. It has been shown that the magnitude of the PTCR effect in the porous materials was very sensitive to both the average grain size and the degree of sintering, where densification to a high relative sintered density above 90% which was normally associated with a significant grain growth led to a drastic degradation of the PTCR effect. This paper is concerned with factors affecting the magnitude of the PTCR effect in barium titanate ceramics, in which the influences of both the inclusions and the ununiformity of grain size existing in the starting material on the effect were specifically investigated. They often cause exaggerated graingrowth leading to a small PTCR effect. Mixtures of Al2O3 and SiO2, SiO2 and TiO2 were intentionally added in the starting material as inclusions in this study.

収録刊行物

  • 窯業協會誌

    窯業協會誌 90 (1044), 469-476, 1982

    公益社団法人 日本セラミックス協会

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ