EBSD法と画像処理を併用した多結晶銅の引張りにおける結晶粒の3次元的塑性ひずみの評価

書誌事項

タイトル別名
  • Evaluation of 3-Dimensional Plastic Strain of Grains in Polycrystalline Copper during Tension by EBSD Method and Digital Image Processing
  • EBSDホウ ト ガゾウ ショリ オ ヘイヨウ シタ タケッショウ コウ ノ ヒッパリ ニ オケル ケッショウリュウ ノ 3ジゲンテキ ソセイヒズミ ノ ヒョウカ

この論文をさがす

抄録

A method of evaluation of six components of grain strain in polycrystalline metal was proposed. In the present method, the electron backscattered diffraction (EBSD) technique and the digital image processing were efficiently combined. Four components of grain strain, εx, εy, εz and γxy were evaluated based on the change in average aspect ratio of the number of pixels inside the grain which was obtained by an optical microscope and digital image analysis, where xy-plane is set on the specimen surface and z-axis is directed perpendicularly to the surface. The other two components, γyz, γzx, were calculated by taking into consideration the restriction of plastic deformation of each grain which was derived on the assumption that the plastic deformation occurred by crystallographic slipping on a single set of slip plane. An angle of the slip planes was 3-dimensionally identified by observation of the slip line by a scanning electron microscope and EBSD technique. Grain strain of polycrystalline copper during tension was evaluated by the proposed method and the results were discussed from the viewpoints of the distribution of grain strains and the deformation restriction by neighboring grains.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (12)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ