厚板の据込み‐バーリング加工法の提案

• 平澤 勝芳

• 堂田 邦明

• 王 志剛

• 横山 尚来

書誌事項

タイトル別名

• Development of Upsetting-Burring Process for Plate Forming.
• アツイタ ノ スエコミ バーリング カコウホウ ノ テイアン

抄録

A new forming process, upsetting-burring process is proposed to produce the parts with a flange from a thick plate. The usual burring operation used in the sheet forming was applied to the thick plate forming and the flange shape can not be obtained satisfactorily. The feature of the newly devised upsetting-burring process has been investigated in detail by FEM analysis and verified by a series of experiments with the aluminum plate. In the upsetting-burring process, the plate is upsetted partly and the upsetted material flows into the flange portion. By changing the upsetting height, width and the taper angle of the lower upsetting die, a flange with sufficient height and good shape accuracy can be formed successfully.

収録刊行物

• 日本機械学会論文集Ｃ編

  日本機械学会論文集Ｃ編 68 (671), 2181-2187, 2002

  一般社団法人 日本機械学会

キーワード

• Plastic Forming
• Press Working
• Forging
• Sheet Metal Forming
• Burring
• Upsetting
• Thick Plate

詳細情報

• CRID: 1390282681334791168
• NII論文ID: 130004234390
• NII論文ID: 110002378602
• NII書誌ID: AN00187463
• DOI: 10.1299/kikaic.68.2181
• COI: 1:CAS:528:DC%2BD38Xns1ektbg%3D
• ISSN: 18848354
• ISSN: 03875024
• NDL書誌ID: 6240479
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I6240479
• Web Site: http://www.jstage.jst.go.jp/article/kikaic1979/68/671/68_671_2181/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可