クリンゲルンベルグ方式曲がり歯傘歯車の検査法に関する研究

機関リポジトリ HANDLE Web Site 被引用文献1件

書誌事項

タイトル別名
  • クリンゲルンベルグ ホウシキ マガリバ カサハグルマ ノ ケンサホウ ニ カン
  • Method for Inspection of Spiral Bevel Gears in Klingelnberg Cyclo-Palloid System

この論文をさがす

抄録

The pair of spiral bevel gears fabricated by Klingelnberg's cyclo-palloid method can be expected to have a good contact pattern because the gear tooth surfaces are fundamentally conjugate. In practice, however, the first gear pair having a good contact pattern is difficult to obtain because of the machine setting errors such as tool setting errors and workpiece setting errors in gear cutting. In this paper, an inspection method for detecting the machine setting errors in spiral bevel gear cutting in a Klingelnberg cyclo-palloid system is proposed. In this method, the coordinates of many points on the gear tooth surface are measured using a coordinate measuring machine and a geometrical gear tooth surface expressed as the functions of the machine settings is estimated by the method of least squares so that the surface can fit the measured data. The deviations of the estimated machine settings from the design values are considered to be the machine setting errors. The machine setting errors in gear cutting were detected using this method and corrective cutting which compensated for the errors was carried out. Consequently, more accurate gear could be obtained.

収録刊行物

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ