Research on mirror surface finish by the ironing process.
Bibliographic Information
- Other Title
-
- しごき加工による表面平滑化に関する研究
- シゴキ カコウ ニ ヨル ヒョウメン ヘイカツカ ニ カンスル ケンキュウ
Search this article
Abstract
The object of this paper is to clarify the mechanism of mirror surface finishing by the ironing process. The mirror surface is needed for electrooptical parts such as optical drums, magnetic discs, etc., which are currently being finished by diamond turning lapping, etc. In the ironing process, the metal surface on the die-side becomes the rubbed surface (Ra≒0.05μm). In the case of applying high viscous oil it is rather inferior to a die surface (Ra≒0.006, 0.011μm) and when lower viscous oils are applied, galling often occurs. The metal surface on the punch-side nears a replica of the punch surface as the reduction increases under the dry conditions at the punch-metal interface. In this experiment, the metal surface was finished to Ra = 0.004μm under dry conditions on the punch-side. high viscous oil on the die-side and 50% in the reduction.
Journal
-
- TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
-
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C 55 (517), 2493-2498, 1989
The Japan Society of Mechanical Engineers
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681334331264
-
- NII Article ID
- 110002391894
- 130004082453
-
- NII Book ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
- http://id.crossref.org/issn/03875024
-
- NDL BIB ID
- 3247823
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed