書誌事項
- タイトル別名
-
- Effect of Fuel Injection Rate Shaping on Spray Combustion. 1st Report. An Electronically Controllable Fuel Injection System for Variable Injection Rate Shaping and Analysis of Spray Characteristics.
- ネンリョウ フンシャリツ ケイジョウ ガ ヒテイジョウ フンム ネンショウ ニ
この論文をさがす
抄録
In order to study the effect of fuel injection rate shaping on spray combustion, an electronically controllable fuel injection system was developed. In this system, the arbitrary injection rate shaping was obtained by controlling the movement of nozzle needle directly with piezoelectric actuator while the fuel pressure was maintained its constant injection pressure. By using this injection system, fuel was injected into the pressure chamber with three types of fuel injection rate shaping with different slope of injection rate rise. From the results of visualizations of non-evaporating spray, it was found that the slope of injection rate rise made great influences on the spatial and temporal fuel distributions and spray temporal evolution. Moreover, it was shown that, though there was no great difference in spray angle in low injection rate, spray angle by lift control injection was larger than that by pressure control injection in high injection rate.
収録刊行物
-
- 日本機械学会論文集B編
-
日本機械学会論文集B編 64 (624), 2737-2743, 1998
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680872654720
-
- NII論文ID
- 130004223095
- 110002397212
-
- NII書誌ID
- AN00187441
-
- ISSN
- 18848346
- 03875016
-
- NDL書誌ID
- 4545261
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可