簡易液圧バルジ試験法による鋼管の成形性評価

DOI Web Site Web Site 被引用文献6件 参考文献15件
  • 桑原 利彦
    東京農工大学大学院共生科学技術研究部物質機能科学部門
  • 森口 恭介
    東京農工大学大学院機械システム工学専攻

書誌事項

タイトル別名
  • Formability Evaluation of Steel Tubes Using a Simplified Hydraulic Bulging Test
  • カンイ エキアツ バルジ シケンホウ ニ ヨル コウカン ノ セイケイセイ ヒョウカ

この論文をさがす

抄録

A simple testing device for evaluating the formability of metal tubes is proposed. In this testing device a tubular specimen is subjected to internal hydraulic pressure to bulge freely with both ends sealed simply using O-rings; thus it bulges under a near uniaxial tension stress state in the circumferential direction. Formability tests using the hydraulic bulging device are performed for eight kinds of electric resistance welded tubes with different mechanical properties, thickness and manufacturing processes. The manufacturing processes of the tubes are classified into three groups: as-rolled, as-rolled and normalized and cold-drawn and normalized. It is found that the uniformity of initial thickness distribution of the tubes significantly depends on the manufacturing process and that the more uniform the thickness, the higher the formability (the limit strain in the circumferential direction) of the tube. The cold-drawn and normalized tubes exhibit anomalous bulging behavior; they do not bulge axisymmetrically and do not burst at the center of the tube. The anomalous behavior of the cold drawn and normalized tubes is successfully reproduced by a FEM analysis taking account of the inhomogeneous thickness and work hardening characteristics of the tube.

収録刊行物

  • 鉄と鋼

    鉄と鋼 91 (12), 868-874, 2005

    一般社団法人 日本鉄鋼協会

被引用文献 (6)*注記

もっと見る

参考文献 (15)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ