銅膜材の疲労き裂伝ぱに伴う結晶方位の変化  [in Japanese] Crystal Rotation with Fatigue Crack Propagation in Copper Films  [in Japanese]

Access this Article

Search this Article

Author(s)

Abstract

The fatigue crack initiation and propagation behaviors were examined for pure copper films of 100 μm thickness. The cold rolled films were annealed and adhered to cover a circular through hole in a base plate. The base plate was subjected to constant cyclic stress with a stress ratio of <i>R</i> = 0. In order to discuss correlation between fatigue crack propagation and change of crystal orientation, crystal orientation on the surface of the copper film was measured before and after fatigue testing. The crystallographic information of these films was analyzed using the Electron Back-scatter Diffraction (EBSD) system and the quantitative evaluation method for the crystal rotation angle and the rotation axis, the rotation direction with fatigue was developed. As a result, the crystal rotation angle near the fatigue crack is larger than that apart from the crack but that is quantitatively small around the crack propagated on the annealing twin boundary.

Journal

  • Journal of the Society of Materials Science, Japan

    Journal of the Society of Materials Science, Japan 54(9), 903-908, 2005

    The Society of Materials Science, Japan

Codes

  • NII Article ID (NAID)
    110006266598
  • NII NACSIS-CAT ID (NCID)
    AN00096175
  • Text Lang
    JPN
  • ISSN
    0514-5163
  • NDL Article ID
    7483690
  • NDL Source Classification
    ZM16(科学技術--科学技術一般--工業材料・材料試験)
  • NDL Call No.
    Z14-267
  • Data Source
    NDL  NII-ELS  J-STAGE 
Page Top