Fundamental Studies on Electron Beam Welding of Heat-resistant Superalloys for Nuclear Plants (Report I) : Effect of Welding Conditions on Some Characteristics of Weld Bead

Search this Article

Author(s)

Abstract

In this paper, the effect of the welding conditions on the characteristics of the weld geometry and the weld defects was made clear, concerning the heat-resistant superalloys for the nuclear plants. Obtained conclusion may be summarized as follows, using technical symbols which are given meanings in this report. 1) The weld defects were R-porosity and microcrack. 2) S_p and Δa_b are considered to be the important criteria for the evaluation of the susceptibility to the R-porosity. 3) Superalloys could be evaluated in the sensitivity to the microcrack in terms of the critical heat input to avoid microcrack q_<cr>. This q_<cr> is considered to be one of the proper criteria for evaluating the superalloys in the susceptibility to the microcrack. 4) Most microcracks were apt to occur when h_c/h_N came near to 1.0. These microcracks came to occur easily with the increase of d_<B・N>/d_B・

Journal

  • Transactions of JWRI

    Transactions of JWRI 5(2), 219-226, 1976-12

    Osaka University

Codes

  • NII Article ID (NAID)
    110006484557
  • NII NACSIS-CAT ID (NCID)
    AA00867058
  • Text Lang
    ENG
  • ISSN
    03874508
  • Data Source
    NII-ELS 
Page Top