ガラス短繊維強化ＰＢＴ樹脂材料の疲労強度に及ぼす平均応力の影響

DOI Web Site 被引用文献1件 参考文献10件

書誌事項

タイトル別名
  • Mean-Stress Effect on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterphathalate
  • ガラス タンセンイ キョウカ PBT ジュシ ザイリョウ ノ ヒロウ キョウド ニ オヨボス ヘイキン オウリョク ノ エイキョウ
  • Mean-Stress Effect on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterephthalate

この論文をさがす

抄録

Round bar specimens of short glass fiber reinforced polybuthyleneterephthalate (PBT) were fatigued under axial-load controlled conditions with six different stress ratios including negative ratio. The tensile mean stress decreased the fatigue strength at a constant fatigue life and the modified Goodman relation gave a dangerous estimate for stress ratios larger than 0.7. The relation between the fatigue strength and the mean stress was expressed by Gerber parabolic relation except that the strength at zero mean stress was equal to the creep strength, but not to the tensile strength. A new method for predicting the mean-stress effect on the fatigue strength was proposed by using creep data and the fatigue strength at one stress ratio. Under cyclic loading with high mean stresses, the creep phenomenon became predominant and the ratcheting deformation increased with the number of cycles. The ratcheting deformation became larger for larger mean stresses at the same stress amplitude and for larger stress amplitudes at the same mean stress. The compliance of the specimen increased with the number of cycles. Fatigue cracks started from the center of the specimen and propagated outward. Fractographic observation revealed the feature of fatigue fracture surfaces made under high stress ratios resembled those of creep fracture surfaces, showing ductile extension of plastic matrix. On the other hand, fatigue fracture surfaces under low stress ratios were rather flat accompanied by pull-out of fibers.

収録刊行物

  • 材料

    材料 55 (10), 951-957, 2006

    公益社団法人 日本材料学会

被引用文献 (1)*注記

もっと見る

参考文献 (10)*注記

もっと見る

関連プロジェクト

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ