オートコリメーション方式深穴形状精度測定システムの開発（第３報）

• 村上 洋

  鹿児島大学工学部

• 甲木 昭雄

  九州大学

• 鬼鞍 宏猷

  九州大学

• 佐島 隆生

  九州大学

書誌事項

タイトル別名

• Development of a Deep-Hole Measuring System by Using Autocollimation Principle (3rd Report)
• オートコリメーション ホウシキ フカアナ ケイジョウ セイド ソクテイ システム ノ カイハツ ダイ3ポウ シンエンド エントウド オヨビ シンチョクド ノ ソクテイ
• - Measurement of Roundness, Cylindricity and Straightness -
• －真円度，円筒度および真直度の測定－

抄録

The measuring system for evaluating the accuracy of a deep hole is developed by using the autocollimation principle. The system consists of a measuring unit and an optical system for light reception. The measuring unit detects the displacement of a feeler on the basis of the autocollimation principle. The optical system for light reception receives the laser beam irradiated from the measuring unit. In this research, the measuring accuracy and repeatability error of the system are evaluated by measuring the roundness, cylindricity and straightness of 110-mm-diameter holes of a ring gage and machined hole. As a result, it is clarified that the accuracies of the roundness, straightness and cylindricity measured by the measuring system correspond well to those by the tester in terms of both shape and value and that the repeatability error of 10 measuring measurements of roundness of machined hole is ±0.4μm.

収録刊行物

• 精密工学会誌

  精密工学会誌 74 (11), 1220-1224, 2008

  公益社団法人 精密工学会

キーワード

• deep hole
• measurement
• autocollimation principle
• laser diode
• roundness
• cylindricity
• straightness

詳細情報

• CRID: 1390282679773176448
• NII論文ID: 110006990564
• NII書誌ID: AN1003250X
• DOI: 10.2493/jjspe.74.1220
• ISSN: 1882675X
• ISSN: 09120289
• NDL書誌ID: 9711042
• Web Site: http://id.ndl.go.jp/bib/9711042
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I9711042
• データソース種別:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
  • KAKEN
• 抄録ライセンスフラグ: 使用不可