101 キャビテーション・ショットレス・ピーニングによる鋼歯車の疲れ強さ向上(OS02-1 歯車の強度I)

• 關 正憲

  岡山大学大学院

• 祖山 均

  東北大学大学院

• 藤井 正浩

  岡山大学大学院

• 吉田 彰

  広島国際大学

書誌事項

タイトル別名

• 101 Increase in Fatigue Strength of Steel Gear by Cavitation Shotless Peening

抄録

In order to investigate the effect of cavitation shotless peening on fatigue strength of steel gears, the case-hardened steel rollers and gears cavitation shotless peened under different conditions were fatigue-tested using a roller testing machine and a gear testing machine. The hardness and the compressive residual stress of the test rollers and gears were increased by cavitation shotless peening. On the other hand, their surface roughness was not increased so much. In the fatigue tests, the fatigue life of most cavitation shotless peened rollers and gears was longer than that of the non-peened roller and gear. In particular, the fatigue life of cavitation shotless peened rollers and gears was significantly improved by using a modified nozzle for a high-speed water jet to obtain a greater peening effect. Therefore, it was found that the cavitation shotless peening is good for the increase in fatigue strength of steel gears.

収録刊行物

• 運動及び動力伝達機構シンポジウム講演論文集

  運動及び動力伝達機構シンポジウム講演論文集 2007 (0), 23-26, 2007

  一般社団法人 日本機械学会

キーワード

• Gear
• Surface Treatment
• Cavitation
• Steel
• Fatigue Strength
• Hardness
• Residual Stress
• Surface Roughness

詳細情報

• CRID: 1390282680868172672
• NII論文ID: 110007082769
• DOI: 10.1299/jsmempt.2007.23
• ISSN: 2424306X
• Web Site: https://www.jstage.jst.go.jp/article/jsmempt/2007/0/2007_23/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可