3513 金属フィラーを用いた液晶マイクロ光造形に関する研究(S65 加工計測・評価システム,S65 加工計測・評価システム)

• 岡部 弘道

  大阪大

• 高谷 裕浩

  大阪大

• 三好 隆志

  大阪大

• 林 照剛

  大阪大

書誌事項

タイトル別名

• 3513 A Study on LCD Micro Stereolithography using metal filler

抄録

Micro-stereolithography is able to fabricate free-form 3D microstructures easily and rapidly by laminating of thin layers formed by cured resin. However, materials that can be used for this method are only photosensitive resin which has no electrical conductivity. So, we developed to mix metal powder which has superior electrical conductivity as the filler into the acrylic photosensitive resin. By applying the resin to micro-stereolithography, we could fabricate 3D microstructures with superior electrical conductivity. We investigate the lamination procedure of fabricating micro parts using the resin mixed with silver particles. As a result, cubic shape could be fabricated and the minimum layer thickness is 5μm.

収録刊行物

• 年次大会講演論文集

  年次大会講演論文集 2007.4 (0), 243-244, 2007

  一般社団法人 日本機械学会

キーワード

• micro stereolithography
• LCD mask
• silver
• electrical conductivity
• photosensitive resin

詳細情報

• CRID: 1390001206063868032
• NII論文ID: 110007085344
• DOI: 10.1299/jsmemecjo.2007.4.0_243
• ISSN: 24331325
• Web Site: https://www.jstage.jst.go.jp/article/jsmemecjo/2007.4/0/2007.4_243/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可