書誌事項
- タイトル別名
-
- 532 Turning aluminum alloy using a cutting tool with microscale and nanoscale textures
抄録
In this study, we aim to develop novel cutting tools that had either microscale or nanoscale textures on their surfaces. The texturing of microscale or nanoscale features on a solid surface allows us to control the tribological characteristics of a tool. Textured carbide and PCD tools were developed using femtosecond laser patterning method and turning experiments were performed on aluminum alloys of ADC12 and A390 under various cutting conditions. As a result, reductions in the cutting forces were observed for the textured tools. This effect was remarkable when cutting the ADC12 rather than the A390, which is caused by the characteristics of the work materials. These results indicate that both the textured carbide tool and PCD tool were effective for cutting aluminum alloys.
収録刊行物
-
- 機械材料・材料加工技術講演会講演論文集
-
機械材料・材料加工技術講演会講演論文集 2009.17 (0), _532-1_-_532-2_, 2009
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205877093888
-
- NII論文ID
- 110008618139
-
- ISSN
- 2424287X
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可