210202 5052/6061アルミニウム合金突合せ摩擦シーム接合継手の機械的性質(OS15 生産加工2,オーガナイズド・セッション)

• 中村 海

  日本大学大学院

• 背尾 直彦

  日本大学大学院

• 仲間 大

  日本大学

• 加藤 数良

  日本大学

書誌事項

タイトル別名

• 210202 Mechanical properties of friction seam butt welded 6061/5052 aluminum alloy joint

抄録

5052/6061 aluminum alloy were friction seam butt welding using a numerical controlled friction stir welding machine. The effect of welding conditions on mechanical properties of friction seam butt welded joint were investigated. The burr of weld zone was increased with increasing of welding speed. Weld defects were not observed in weld interface and weld zone showed tine structures than that of the base metal. Maximum temperature during seam welding of the retreating side was higher than the advancing side. Maximum tensile strength of joint showed 217MPa. The joints were fractured at heat attached zone near the advancing side of weld zone.

収録刊行物

• 日本機械学会関東支部総会講演会講演論文集

  日本機械学会関東支部総会講演会講演論文集 2011.17 (0), 319-320, 2011

  一般社団法人 日本機械学会

キーワード

• Friction seam butt welding
• 5052
• 6061 aluminum alloy
• Mechanical properties
• Dissimilar welding

詳細情報

• CRID: 1390282680822772352
• NII論文ID: 110009663878
• DOI: 10.1299/jsmekanto.2011.17.319
• ISSN: 24242691
• Web Site: https://www.jstage.jst.go.jp/article/jsmekanto/2011.17/0/2011.17_319/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可