書誌事項
- タイトル別名
-
- G031101 Expansion for Design Guidance of Threaded End of Pressure Cylinder in High-Pressure Facilities
抄録
One of the design methods for closing the end of a pressure cylinder is to screw down a screw plug on the threaded end of the cylinder. In this case, these is the problem of stress concentration in the threaded end of the pressure cylinder. To solve the problem, it is necessary to know accurately the load distribution on the threaded end of the cylinder. To find the load distribution on the threaded end of the pressure cylinder engaged with the screw plug, the following experiments are carried out. Applying the tensile load between the plug and the pressure cylinder and regarding the situation above as equivalent to the situation in which the internal pressure is applied, the load distribution is measured with the strain gauge. The influence of material of engaged thread on the load distribution on the threaded end of pressure cylinder is presented and an expansion of design manual is discussed.
収録刊行物
-
- 年次大会
-
年次大会 2013 (0), _G031101-1-_G031101-4, 2013
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680818815104
-
- NII論文ID
- 110009931912
-
- ISSN
- 24242667
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可