GS15 オーステナイト鋼の機械的特性の統計的分布とその推定

DOI Web Site

書誌事項

タイトル別名
  • GS15 Statistical Distribution and Estimation of Mechanical Properties of Austenitic Stainless Steels

抄録

To design structures, material strength properties are required, and these properties are dispersed. If this dispersion can be evaluated properly, the design margin can be set theoretically and at a reasonable cost In general, the minimum strength is specified when the steels are obtained. In the present report, strength data of austenitic steels are obtained, and the statistical distributions of the steels are considered using normal distribution and 3-parameter Weibull distribution. Also, strength at high temperature is considered. In the results, the distributions of 0.2 % proof strength of austenitic steels can be expressed as both normal distribution and 3-parameter Weibull distribution, and the shape parameter of the Weibull distribution is related to the cumulative distribution expressed by the normal distribution with location parameters expressed by the Weibull distribution, and the strength at high temperature is related to the chemical compositions. From the results, guidelines for assessing the probability of fracture of structures can be obtained.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ