OS1401 混合ガス燃焼時の配管強度に関する研究 : 高ひずみ速度における機械的特性

書誌事項

タイトル別名
  • OS1401 Investigation for Piping Strength against Mixed Gas Combustion : High strain rate mechanical properties

抄録

Accumulated gases in the piping of BWRs are stoichiometric hydrogen-oxygen and steam. The detonation of the gas accumulated in the piping of BWRs causes high pressure about 20 times higher than initial pressure. We investigated a method for evaluating the strain of piping subjected to internal detonation by using FEM analysis. This study investigated the relationship between mechanical properties and strain rate on detonation conditions by carrying out the high-speed impact tensile test of the piping material. The specimens were made of carbon steel, low-alloy steel which are used for the piping of BWRs and weld metals. Any case shows high ductility irrespective of a rate of strain and temperature. It was found that yield stress and tensile strength tend to become lower at higher temperature. We obtained the nominal stress-strain relationship by the tensile tests to use it in an FEM analysis.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ