G0410501 摩擦撹拌インクリメンタルフォーミング法における工具径が成形性に及ぼす影響([G041-05]機械材料・材料加工部門一般セッション(5),機械材料・材料加工部門)

DOI Web Site

書誌事項

タイトル別名
  • G0410501 Effect of tool diameter on formability in friction stir incremental forming

抄録

Effect of tool diameter on formability in friction stir incremental forming was investigated. Formabilities were compared by forming pure titanium sheets which dimension is 100 mm x 100 mm x 0.3 mm. Tool diameters were 4, 5, 6 and 8 mm. From the experimental results, it was confirmed that as the diameter of forming tool became smaller, the formability became higher and the range of formable tool rotation rate was wider.

収録刊行物

  • 年次大会

    年次大会 2014 (0), _G0410501--_G0410501-, 2014

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ