書誌事項
- タイトル別名
-
- S0410104 Materials Development about the Sintered Bearing Prepared by Unification Forming of Different Metals Powder
抄録
The composite journal bearings which have outer layer with high strength and inner layer with high wear resistance can be used as bearing materials in the industrial high-power machine. The bearing prepared by unification forming of two different mixed powders were compacted in the shape of a double-layers cylinder and then it was sintered for various sintering times at 1403K. In this study, the radial crushing strength of the sintered bearing with various mixed powder compositions for an outer layer as back-up material was examined and the friction and wear properties in this bearing also were estimated. The radial crushing strength of sintered bearing with outer layer composition of Fe-Cu-C mixed powder is increases by the addition of phosphorus of less than 1.0 mass%, nevertheless the density of developed sintered composite bearing is low.
収録刊行物
-
- 年次大会
-
年次大会 2014 (0), _S0410104--_S0410104-, 2014
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680821261056
-
- NII論文ID
- 110009944191
-
- ISSN
- 24242667
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可