11105 AZ31マグネシウム合金切削屑を用いた摩擦固化成形体の機械的性質に及ぼす予熱過程の影響

• 萩原 正敬

  日本大学大学院

• 野本 光輝

  日本大学

• 前田 将克

  日本大学

• 加藤 数良

  日本大学

書誌事項

タイトル別名

• 11105 Effects of Preheating Process on Mechanical Properties of Friction Consolidated AZ31 Magnesium Alloy Chips

抄録

Friction consolidated using AZ31 magnesium alloy chips. Microstructures and mechanical properties of consolidated specimen were investigated effect of preheating process. Except the chips in all conditions it is possible to obtain a high-density molded body having no voids, relative density was 98% or more. Average grain size of the consolidated specimen become fine with decrease of the preheating pressure and got a value lower than one-half in comparison with the base metal in consolidated central part. The hardness cured with the grain refinement. The tensile strength showed a tendency to rise equally and showed joint efficiency of 78% in comparison with the base metal at the maximum.

収録刊行物

• 日本機械学会関東支部総会講演会講演論文集

  日本機械学会関東支部総会講演会講演論文集 2015.21 (0), _11105-1_-_11105-2_, 2015

  一般社団法人 日本機械学会

キーワード

• Friction consolidating
• AZ31 magnesium alloy
• Mechanical properties

詳細情報

• CRID: 1390001205849453824
• NII論文ID: 110009948273
• DOI: 10.1299/jsmekanto.2015.21._11105-1_
• ISSN: 24242691
• Web Site: https://www.jstage.jst.go.jp/article/jsmekanto/2015.21/0/2015.21__11105-1_/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可