P-6 切削加工用レジンの表面処理条件と支台歯材質が接着強さに及ぼす影響(CAD/CAM用レジン,一般講演(ポスター発表),第66回日本歯科理工学会学術講演会)

書誌事項

タイトル別名
  • P-6 Influence of surface treatment conditions of hybrid composite resin for CAD/CAM processing and abutment materials on the adhesive strength

この論文をさがす

抄録

This study examined the adhesive strength between commercial resin cements and the newly developed hybrid resin block (KZR- CAD HR block2) or the abutment tooth (dentine and metal). Sand-blasting of HR Block 2 at 0.2〜0.3 MPa pressure seems to be suitable for the adhesion. The adhesive strength between the commercial resin cements and the HR block 2 depended on the cement.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ