OS1523-365 CFRP接着接合部材のモードI+II疲労き裂進展特性に及ぼす負荷速度の影響

書誌事項

タイトル別名
  • OS1523-365 Effect of Loading Rate on Mode I+II Fatigue Crack Growth Behavior in CFRP Adhesive Joints

抄録

Unidirectional carbon/epoxy (T700SC/2592) adhesively-bonded by EP008 specimens were evaluated under decreasing energy release rate (G_<max>) conditions. Mixed mode fatigue crack growth behaviour of CFRP adhesive joint were investigated by mixed mode flexure (MMF) test at several loading rate of 0.1Hz, 1.0Hz and 10Hz. Experiments were conducted under linear fracture region. Thus by using compliance method, fatigue crack growth behavior of CFRP adhesive joint can be evaluated from energy release rate (G_<max>) condition for each specimen. Experiment results showed that threshold values did not dependent on loading rate but in higher energy release rate (G_<max>) region, dependency on loading rate has been confirmed. In addition, brittle fracture surfaces were identified when observed by scanning electron microscope (SEM).

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ