Impact of micro-porous layer on liquid water distribution at the catalyst layer interface and cell performance in a polymer electrolyte membrane fuel cell

• Tabe, Yutaka

• Aoyama, Yusuke

• Kadowaki, Kazumasa

• Suzuki, Kengo

• Chikahisa, Takemi

抄録

In polymer electrolyte membrane fuel cells, a gas diffusion layer (GDL) with a micro-porous layer (MPL) gives better anti-flooding performance than GDLs without an MPL. To investigate the function and mechanism of the MPL to suppress water flooding, the liquid water distribution at the cathode catalyst layer (CL) surface are observed by a freezing method; in the method liquid water is immobilized in ice form by rapid freezing, followed by disassembling the cell for observations. The ice covered area is quantified by image processing and cells with and without an MPL are compared. The results show that the MPL suppresses water accumulation at the interface due to smaller pore size and finer contact with the CL, and this results in less water flooding. Investigation of ice formed after −10 °C cold start shutdowns and the temporary performance deterioration at ordinary temperatures also indicates a significant influence of the liquid water accumulating at the interface. The importance of the fine contact between CL and MPL, the relative absence of gaps, is demonstrated by a gas diffusion electrode (GDE) which is directly coated with catalyst ink on the surface of the MPL achieving finer contact of the layers.

収録刊行物

• Journal of Power Sources

  Journal of Power Sources 287 422-430, 2015-08-01

  Elsevier

キーワード

• PEM fuel cell
• Micro-porous layer
• Liquid water distribution
• Flooding
• Image analysis
• Water management

詳細情報

• CRID: 1050845763949397248
• NII論文ID: 120006328991
• HANDLE: 2115/66894
• ISSN: 03787753
• 本文言語コード: en
• 資料種別: journal article
• データソース種別:
  • IRDB
  • CiNii Articles