オーステナイト系ステンレス鋼の高圧窒素雰囲気中における溶接性と機械的性質  [in Japanese] Weldability in High Pressure Nitrogen Atmosphere and Mechanical Property of Weld Metal of Austenitic Stainless Steel  [in Japanese]

Access this Article

Search this Article

Author(s)

Abstract

Austenitic stainless steel was welded by GTA and GMA methods in high pressure up to 6.1MPa nitrogen pressure. Welding condition, nitrogen absorption and microstructure of solidified metals have been investigated.<br> Nitrogen content (N) of GMA solidified metal increased from 0.2 to 0.65 mass% with increasing in pressure from 0.1 to 6.1 MPa. The fracture toughness of the weld metals was measured by means of the Charpy impact test at test temperature range from 77K to 290K. The Vickers's hardness number increased from 225HV to 350HV with N. The toughness increased with N up to 0.4%. However, N exceeded about 0.5% the intergranular fracture was easily caused by Cr<sub>2</sub>N and solidification micro cracks. Cr<sub>2</sub>N at the grain boundary can be absorbed in γ matrix and micro cracks were prevented by several % of Mn additions, then the fracture toughness at low temperature can be improved.

Journal

  • DENKI-SEIKO

    DENKI-SEIKO 75(4), 253-260, 2004

    Daido Steel Co., Ltd.

Codes

  • NII Article ID (NAID)
    130000255700
  • NII NACSIS-CAT ID (NCID)
    AN00152276
  • Text Lang
    JPN
  • Article Type
    特集
  • ISSN
    0011-8389
  • NDL Article ID
    7125417
  • NDL Source Classification
    ZP42(科学技術--金属工学・鉱山工学--鉄鋼)
  • NDL Call No.
    Z17-268
  • Data Source
    NDL  J-STAGE 
Page Top