書誌事項
- タイトル別名
-
- High Efficiency and High Quality Welding of Aluminum Alloy by Hybrid System Combined Nd:YAG Laser and Diode Laser
- LD チョウジョウ ハイブリッドガタ Nd YAG レーザ システム ニ ヨル アルミニウム ゴウキン ノ コウコウリツ コウヒンシツ ヨウセツ
この論文をさがす
抄録
Recently the welding of aluminum alloy has been strongly required for the lightening the electronic products, the automobiles and so on. Then the hybrid laser system was newly developed in order to perform the high efficiency and high quality welding of aluminum alloy. The high electric-optical conversion efficiency was achieved by the new diode pumped pulsed Nd:YAG laser. The hybrid system is consisted of a newly developed pulsed Nd:YAG laser and a continuous diode laser, and it can deliver two lasers by one fiber. Higher absorption of laser energy into the aluminum alloy can be expected under the continuous irradiation of diode laser (λ= 808 nm), since the absorption into aluminum alloy shows the maximum at λ= 850 nm. The suitable bead width and depth could be obtained with better surface integrity when the pulse waveform took the highest peak at the first period. The bead width and depth increased with increasing the power of continuous diode laser, which leads to overlapping welding even under high speed condition. Moreover, the high efficiency and high quality welding of aluminum battery case could be accomplished by the newly developed hybrid system, in which the suitable pulse energy and the peak power could be given even under the high pulse repetition rate.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 75 (10), 1222-1226, 2009
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679773582720
-
- NII論文ID
- 130000421508
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 10462673
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可