ビード熔接による横収縮,横曲り変形と熔接条件との関係

• 渡辺 正紀

  大阪大学工学部

• 佐藤 邦彦

  大阪大学工学部

書誌事項

タイトル別名

• Effect of Welding Conditions on the Transverse Shrinkage Distortion of Bead-on Plates
• Shrinkage distortion in welded joints (Report 1)
• 熔接継手の収縮変形に関する研究(第1報)

抄録

As the most fundamental case of shrinkage distortion in welded joints, we have studied on the transverse shrinkage distortion of bead-on plates. Characteristics of transverse. shrinkage distortion are shown in Fig. 4. Both angular distortion and shrinkage produce near the weld bead, and the distorted portion correspondes to the range heated above 150-200°Cwhen welding (see Fig. 5). Comparing the results of Fig 1, 2 and 3, we know the shrinkage distortion appears approximately uniform except for the ends of weld.<BR>To analyse the deformation of bead-on plate we assumed that shrinkage forces and shrinkage moments act as shown in Fig. 6, and inherent strain, the cause of distortion, distribute as shown in Fig. 7. Transverse shrinkage and angular change are then represented by eqs. (1) and (2). Fig. 8 shows the characteristics of these equations.<BR>Simple formulas of transverse shrinkage and angular change are obtained from Fig. 8 and the results of our former study (see Reference 1), and they are eqs. (6) and (7). Experimental results are shown in Fig. 9 and 10.

収録刊行物

• 溶接学会誌

  溶接学会誌 25 (4), 211-216, 1956

  一般社団法人 溶接学会

キーワード

• Metals and Alloys
• Surfaces, Coatings and Films
• Mechanical Engineering
• Mechanics of Materials

詳細情報

• CRID: 1390001206500929792
• NII論文ID: 130003762649
• DOI: 10.2207/qjjws1943.25.211
• ISSN: 18837204
• ISSN: 00214787
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可