Measurement of Beam Energy Absorption in CO2 Laser Beam Welding.

DOI Web Site 被引用文献1件 参考文献9件

書誌事項

タイトル別名
  • Measurement of Beam Energy Absorption i

この論文をさがす

抄録

Rate of absorption of CO2 laser beam energy during bead-on-plate welding of SM400 mild steel plate was measured. A 10 kW industrial CO2 laser welding equipment was used in this study.<BR>In the first part of the experiments, bead-on-plate welding was made on a water-cooled steel plate placed in a welding jig made of acrylic plastics. The surface of the steel plate was machine-finished. The laser beam energy absorbed into the steel plate was calculated from the measurements of the inlet and the outlet water temperatures, the water flow rate and the beam-on time. Rate of absorption was calculated as the ratio of the absorbed beam energy to the total beam power.<BR>In the second part, bead-on-plate welding was carried out on either a machine-finished, a paint-coated on machine-finished or a ground-finished steel plate. Absorption was also evaluated.<BR>In the third part, heat conduction loss to the acrylic welding jig was evaluated and found to be approximately 5%. The results of measurements and calculation were reported and discussed.<BR>It was estimated in this study that absorption of CO2 laser beam energy during bead-on-plate welding of a mild steel plate at a laser power of 10 kW was in the range from 30 to 50%.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (9)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ