エアジェットによる付着微粒子除去効果に対する除去対象表面走査の影響
書誌事項
- タイトル別名
-
- Effect of Target Plate Scanning on the Removal of Adhered Particles by a High-speed Air Jet
抄録
Removal of single particles adhering on a flat plate by a high-speed air jet has been investigated experimentally. Although jet nozzle or removal target is scanned in an industrial application of the air jet removal, almost all previous fundamental investigations for the air jet removal were carried out with a fixed nozzle and a fixed target. Therefore, we aimed at elucidating how the scanning speed of target flat plate affects the removal efficiency.<br>Experimental results showed that the removal efficiencies at a constant air pressure of the nozzle decreased with an increase in the scanning speed of the target plate. With an increase in the scanning speed, the residence time of adhered particles in the effective jet exposure area is decreased. Therefore, the decrease in the removal efficiency with an increase of the scanning speed is caused mainly by a decrease in the residence time in the impinging air jet. It was also found that the effective area can be estimated by the equation of stable removal region on a fixed target.
収録刊行物
-
- 粉体工学会誌
-
粉体工学会誌 45 (10), 690-696, 2008
一般社団法人 粉体工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679489576832
-
- NII論文ID
- 130003952843
-
- ISSN
- 18837239
- 03866157
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可