Effeet of precipitation heat treatment on extrudability of ingtos of 6063 alloy
-
- SHIBATA Kizo
- Hokusei Aluminium Co. Ltd.
-
- OTSUKA Ichiro
- Hokusei Aluminium Co. Ltd.
-
- ANADA Shoichi
- Hokusei Aluminium Co. Ltd.
-
- YAMABE Masao
- Hokusei Aluminium Co. Ltd.
-
- KUSABIRAKI Kazuo
- Hokusei Aluminium Co. Ltd.
Bibliographic Information
- Other Title
-
- 鋳塊の押出性に及ぼす析出処理の影響
- チュウコン ノ オシダシセイ ニ オヨボス セキシュツ ショリ ノ エイキョウ
Search this article
Abstract
Extrusion tests were carried out on 6063 alloy ingots in which Mg2Si particles were precipitated by isothermal precipitation treatment or by slow cooling after homogenizing. Extrudability of ingots was estimated by the extrusion pressure, the critical extrusion rate to cause tearing on the surface of extrusions and mechanical properties of extrusions. The principal results obtained are summarized as follows.<br>(1) Coarse particles of Mg2Si, particularly precipitated at about 400°C, reduce the extrusion pressure.<br>(2) Such coarse particles are the cause of tearing, thus, reduce the critical extrusion rate.<br>(3) Coarse particles of Mg2Si, particularly precipitated by slow cooling from homogenizing temperature, can not be disolved completely during extrusion process, and thus reduce tensile strength of extrusions after artificial aging.
Journal
-
- Journal of Japan Institute of Light Metals
-
Journal of Japan Institute of Light Metals 26 (7), 327-335, 1976
The Japan Institute of Light Metals
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681316619392
-
- NII Article ID
- 130004207880
- 10003136374
-
- NII Book ID
- AN00069773
-
- ISSN
- 18808018
- 04515994
-
- NDL BIB ID
- 1719043
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed