歯車とローラを用いたハイブリッド形減速機の設計・製作と性能　Ｉ　　新減速機の試作とその動力伝達効率について

DOI Web Site

書誌事項

タイトル別名
  • Design, manufacture and performance of hybrid reducers with gear and traction elements. (1st report Trial-made of a new speed reducer and power transmission efficiency)

抄録

Gear drives have been widely used because of their high power transmission efficiency and the compactness of the gear box. However, gear noise causes trouble in many cases when gear drives are operated at high speed. In order to minimize noise from speed reducers, the authors designed and made a new hybrid speed-reducer with two reduction stages consisting of gear and traction drives. A traction drive with one driving roller and three following rollers was used in the first stage, and a gear drive with three pinion and one gear was used in the second stage. Power transmission efficiency of the trial speed reducer with a total reduction ratio of about 20 was higher than 90%, and running noise from the speed reducer was extremely low.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ