乾湿繰り返しをともなうSO<sub>2</sub>ガス中におけるステンレス鋼の腐食挙動

  • 江原 隆一郎
    三菱重工業株式会社広島研究所物質工学研究室
  • 中本 英雄
    三菱重工業株式会社広島研究所物質工学研究室
  • 松本 竹二
    三菱重工業株式会社広島製作所鉄構部
  • 松橋 亮
    新日本製鐵株式会社第二技術研究所ステンレス・チタン研究センター
  • 佐藤 栄次
    新日本製鐵株式会社第二技術研究所ステンレス・チタン研究センター
  • 安保 秀雄
    新日本製鐵株式会社第二技術研究所ステンレス・チタン研究センター

書誌事項

タイトル別名
  • Corrosion Behavior of Stainless Steels in an Alternating Dry-Wet Environment with SO<sub>2</sub> Gas
  • 乾湿繰り返しをともなうSO2ガス中におけるステンレス鋼の腐食挙動
  • カンシツ クリカエシ オ トモナウ SO2 ガスチュウ ニ オケル ステンレス
  • Corrosion Behavior of Stainless Steels in an Alternating Dry-Wet Environment with SO2 Gas

この論文をさがす

抄録

In order to obtain the basic guideline for selecting materials used for smokestack exposed in a water dew point environment with SO2 gas (500, 2000ppm), corrosion tests of various kind of stainless steels were conducted by use of a laboratory made alternating dry-wet gas corrosion testing apparatus. Austenitic stainless steels, duplex stainless steels and superalloys showed very high corrosion resistance at a corrosion rate of less than 0.05g/(m2·h). While, low-alloy steel and ferritic stainless steels were less resistant against corrosion at corrosion rate of higher than 0.4g/(m2·h). In a water dew point environment with SO2 gas, the corrosion index (SO2/water dew point corrosion index), S.C.I=[Cr]+2.1[Mo]+1.2[Cu] was obtained. Stainless steels with S.C.I of higher than 20 were highly resistant to corrosion. Surface film formed on the austenitic stainless steels in the thickness range of hundreds to thousands Å were mainly consisted of oxides. It was observed that austenitic stainless steels became higher resistant to corrosion, the thinner the surface film was.

収録刊行物

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ