Mechanical Characteristics of EPS Block Fill and Its Simulation by DEM and FEM.
書誌事項
- タイトル別名
-
- Mechanical Characteristics of EPS Block
この論文をさがす
抄録
The mechanical characteristics of an EPS block light weight fill, which consists of assembled EPS (Expanded Poly-Styrol) blocks, was investigated. The mechanism of load propagation and deformation of the fill was examined in two series of laboratory tests on EPS block model fills ; Load Propagation and Deformation Tests were conducted on the EPS block model fills with various internal structures. The test results obtained, revealed that the characteristic mechanical behavior of the fill is a type of discrete media ; the mechanical properties of EPS block fill is very much influenced by its internal structure. The influence of fasteners was also investigated experimentally. The behaviors of the fills observed in the laboratory tests were analyzed by two numerical calculation methods : DEM (Distinct Element Method) and FEM (Finite Element Method). As a result of the comparison of the calculation results with the observed behaviors, the superior applicability of DEM to EPS block fills was shown. It was found that DEM can explain the load propagation properties with regard to the effect of fastener, and simulate the deformation behavior of the fill.
収録刊行物
-
- 地盤工学会論文報告集
-
地盤工学会論文報告集 38 (1), 97-110, 1998
公益社団法人 地盤工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204610250752
-
- NII論文ID
- 110003946122
- 130004247404
-
- NII書誌ID
- AN10496056
-
- NDL書誌ID
- 4447029
-
- ISSN
- 13417452
- 00380806
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- NDL-Digital
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可