合板の割裂強さを担う二軸配向と接着層の役割:- 鉄骨木質構造の研究 その8 - ALTERNATE PLIES AND ADHESIVE BONDS IN THE SPLITTING RESISTANCE OF PLYWOOD:— Study on steel-framed timber structures Part 8 —

この論文にアクセスする

この論文をさがす

著者

    • 桑村 仁 KUWAMURA Hitoshi
    • 東京大学大学院工学系研究科建築学専攻 教授・Ph. D. Prof., Dept. of Architecture, School of Engineering, The University of Tokyo, Ph. D.

抄録

Strengths of plywood subjected to in-plane tension, bending, and interior pressure in a hole were experimentally investigated. The tested plywood is composed of nine plies of lauan veneer, and the plies are bonded together with melamine-urea-formaldehyde cocondensate adhesives. These tests, when the axis of tensile or bending specimen is inclined to the face grain, reveal the reason why plywood is so resistant against splitting failure is owing to the alternate perpendicular plies of veneer as well as the sufficient shear strength of adhesive bond. In such a case, the crack of veneer is interrupted by neighborhood veneer, and then the fracture path is associated with shear failure of the bond. In other words, either tensile or bending strength of such an inclined plywood member is substantially elevated by the shear strength of the bond. For the same reason, the holed plate under interior pressure does not split but experiences compressive yielding only if the edge distance is greater than double the diameter of the hole.

収録刊行物

  • 日本建築学会構造系論文集

    日本建築学会構造系論文集 76(663), 969-978, 2011

    日本建築学会

各種コード

  • NII論文ID(NAID)
    130004752446
  • NII書誌ID(NCID)
    AN10438559
  • 本文言語コード
    UNK
  • ISSN
    1340-4202
  • NDL 記事登録ID
    11111230
  • NDL 雑誌分類
    ZN1(科学技術--建設工学・建設業)
  • NDL 請求記号
    Z16-1419
  • データ提供元
    NDL  J-STAGE 
ページトップへ