Bondability of Copper Joints Formed Using a Mixed Paste of Ag<sub>2</sub>O and CuO for Low-Temperature Sinter Bonding
-
- Ogura Tomo
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Yagishita Tomohiro
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Takata Shinya
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Fujimoto Tomoyuki
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Hirose Akio
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
Bibliographic Information
- Other Title
-
- 低温焼結接合のための酸化銀および酸化銅混合ペーストを用いた銅継手の接合性評価
- テイオン ショウケツ セツゴウ ノ タメ ノ サンカギン オヨビ サンカ ドウ コンゴウ ペースト オ モチイタ ドウ ツギテ ノ セツゴウセイ ヒョウカ
- Bondability of Copper Joints Formed Using a Mixed Paste of Ag2O and CuO for Low-Temperature Sinter Bonding
Search this article
Abstract
The bondability of copper joints formed using a mixed paste of silver oxide (Ag2O) and copper oxide (CuO) that contained reducing solvents was evaluated in order to achieve bonds that exhibited high migration tolerance and could serve as Pb-free alternatives to the conventional bonds formed using high-melting point solders in electronics packaging. The Ag2O particles reduced into silver nanoparticles at 150℃, whereas the CuO reduced into copper nanoparticles about 300℃. The joints formed using the Ag2O/CuO mixed paste, when heated to the appropriate levels, exhibited bondability superior to that of conventional Pb-5Sn joints. The oxide film formed on the copper substrate was reduced by the combustion of polyethylene glycol 400, and bonding was achieved between the sintered layer and the copper substrate. A longer period resulted in the oxidisation of a few layers of sintered copper layers into Cu2O. The ion-migration tolerance of the Ag2O/CuO mixed paste was approximately four times that of a layer of pure sintered silver.<br>
Journal
-
- Journal of the Japan Institute of Metals and Materials
-
Journal of the Japan Institute of Metals and Materials 78 (7), 280-285, 2014
The Japan Institute of Metals and Materials
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681458154496
-
- NII Article ID
- 130004786466
-
- NII Book ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL BIB ID
- 025631079
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- Abstract License Flag
- Disallowed