Influences of Contact Opening Speeds on Break Arc Behaviors of AgSnO<sub>2</sub> Contact Pairs in DC Inductive Load Conditions
-
- HASEGAWA Makoto
- Chitose Institute of Science and Technology
抄録
Break operations of DC inductive (L=20mH) load currents up to about 5A with 14V were conducted in air with AgSnO2 contact pairs under different contact opening speeds, first up to 20mm/s and then to 200mm/s. Average break arc duration at each current level was calculated under the respective opening speeds. While break arc durations became shorter with increases in the opening speeds at larger current levels, such reduction tendencies were less significant with an increase of the contact opening speed from 20mm/s to 200mm/s, even when operated to break a load current of 5A. Both load current levels and contact opening speed levels seem to exhibit certain roles for realizing arc shortening effects.
収録刊行物
-
- IEICE Transactions on Electronics
-
IEICE Transactions on Electronics E98.C (9), 923-927, 2015
一般社団法人 電子情報通信学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679354235520
-
- NII論文ID
- 130005096787
-
- ISSN
- 17451353
- 09168524
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可