-
- 林 勇貴
- 長岡技術科学大学大学院 日本学術振興会特別研究員
-
- Siddharth LOKACHARI
- 長岡技術科学大学大学院
-
- 山岸 郷志
- 長岡技術科学大学大学院工学研究科
-
- 岡崎 正和
- 長岡技術科学大学大学院工学研究科
-
- 深沼 博隆
- プラズマ技研工業(株)
書誌事項
- タイトル別名
-
- Effect of Top coat Spraying Condition on CMAS Damage Kinetics in Air Plasma Sprayed Thermal Barrier Coatings
- タイキ プラズマ ヨウシャシャネツ コーティング ノ CMAS ソンショウ ハッタツ キョドウ ニ オヨボス トップコート ヨウシャ ジョウケン ノ エイキョウ
この論文をさがす
抄録
<p>One of new material issues of thermal barrier coatings (TBCs) on hot section components in gas turbine engines is the attack by molten calcium-magnesium-alumino-silicates (CMAS). In this work the influence of the top coat spraying condition on the CMAS damage kinetics in air plasma sprayed (APSed) TBC specimens was investigated by employing a synthetic CMAS product. Experimental works were carried out with three different top coats prepared from powders with different particle sizes and shapes. It was found that the depth of CMAS infiltration increased proportionally to the square root of exposure time in all specimens. The infiltration rate was analyzed based on a mercury porosimetry measurement, which suggested that the physical CMAS infiltration into the APSed top coat by the virtue of capillary action may play an intrinsic role in the CMAS damage. The reaction rate between the CMAS and the ceramic top coat was also influenced by the spraying condition.</p>
収録刊行物
-
- 材料
-
材料 66 (2), 80-85, 2017
公益社団法人 日本材料学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680422897792
-
- NII論文ID
- 130005240491
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 027994328
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可