書誌事項
- タイトル別名
-
- Estimation of recovery heat and power conversion from exhaust gas in the small-size combustion furnace using water and hydrocarbons as working fluids
抄録
<p>The heat transfer between exhaust gas and working fluid in a series of helical tube installed in a combustion furnace was analyzed numerically in order to discuss the development of heat recovery system combined with a small size combustion furnace. The dimensions of the equipment were about 0.49 m3 volume chamber with 2.5 m height chimney where the 250 m helical tube piping was available. The assumption of uniform gas side temperature referenced by the CFD simulation was used for simplify of the gas-side analysis. The inside heat transfer rate with phase change of working fluids were estimated numerically. The amounts of generation vapor and the effective tube length of pressure drop and the isentropic theoretical thermal efficiency on T-s diagram for water and hydrocarbons were also analyze for the discussion in comparison.</p>
収録刊行物
-
- 日本機械学会論文集
-
日本機械学会論文集 83 (845), 16-00332-16-00332, 2017
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205515350144
-
- NII論文ID
- 130005303903
-
- ISSN
- 21879761
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可